SOONTAI - Power Tap (Excellent Return Loss)

Soontai - a worldwide well-known manufacturer of catv filter solutions;
- a trusted partner, provide the better choice for you.

Products

	- by Function -

	Adapters Amplifiers Attenuators Band Attenuators Cable Assemblies Calibration Kits Connectors DC Blocks Diplexers, Triplexers Equalizers Band Equalizers Filters Impedance Converters Isolators > Power Inserters Splitters, Taps Surge Protectors Switches Terminators Torque Wrenches SOONTAI TECH CO., LTD. Registered to ISO 9001 Certificate TW12/11128

2.3 GHz
Power Tap

Features

* High RFI Shielding

* Support DOCSIS 3.1, up to 2.3 GHz

* Low Loss

* High Isolation

* Excellent Return Loss

* Flat Passband

* Robust Die-casting Housing

* Excellent Connector Thread

* Exquisite Plating Quality

* Good Weather Resistance

Introduction

Sometimes when you set up your TV, CATV, MMDS or satellite receiving system, you need to pick up the power from the coaxial cable.

With this power tap, you can plug in a coaxial cable to get or monitor the power.

Although power taps are only a small device in the system, poor quality power taps can have a large impact on signal quality, most commonly causing signal leakage.

The PT1-123 is a well-designed power tap with many features:

1. Minimum insertion loss, minimized signal loss.

2. Excellent return loss provides good impedance matching to prevent intermodulation distortion and reduce signal loss and noise levels, ensuring that the signal is clean.

3. High isolation prevents signals from leaking to the power port causing signal degradation.

4. The PT1-123 has two flexible screw mounting holes, one screw mounting hole and one ground screw hole for flexible mounting and grounding wire installation for safety.

5. Closed and thick die-casting housing provides very good RFI shielding performance.

**Electrical Curve**
Signal Port - IN/OUT Port Insertion Loss and Return Loss Fig 1	Signal Port - Power Port Isolation Fig 2

**General Specifications**
Item	PT1 - 123
Impedance	75 ohm
Frequency Range	15 - 1000MHz	1000 - 2300MHz
Insertion Loss	0.5dB (typ) / 1.0dB (max)	1.0dB (typ) / 2.2dB (max)
Return Loss	20dB (typ) / 12dB (min)	20dB (typ) / 12dB (min)
Isolation	60dB (typ) / 50dB (min)	45dB (typ) / 30dB (min)
Voltage Withstanding	DC 100V (max)
Current Passing	DC 1 A (max)
Dimensions	18(H) x 54(W) x 45(D) mm
Net Weight	46.5g

* Specifications may be change depending on the model or customer's requirement.