SOONTAI - Power Inserter (2.3GHz, CE Approved, Excellent Return Loss)

Soontai - a worldwide well-known manufacturer of catv filter solutions;
- a trusted partner, provide the better choice for you.

Products

	- by Function -

	Adapters Amplifiers Attenuators Band Attenuators Cable Assemblies Calibration Kits Connectors DC Blocks Diplexers, Triplexers Equalizers Band Equalizers Filters Impedance Converters Isolators > Power Inserters Splitters, Taps Surge Protectors Switches Terminators Torque Wrenches SOONTAI TECH CO., LTD. Registered to ISO 9001 Certificate TW12/11128

1218 MHz
Power Inserter

Features

* Support DOCSIS 3.1, 1218 MHz

* Low Loss

* Good Return Loss

* Flat Passband

* High Isolation

* Compact Size

* Solder-back Die-casting Housing

* High RFI Shielding

* Good Connector Thread

* Good Plating Quality

* Good Weather Resistance

Introduction

Sometimes TV, CATV, MMDS or satellite reception system set-up need a power inserter.

Although the power inserter is only a small device in the system, a bad power inserter can have a large impact on signal quality, the most common being the generation of intermodulation distortion.

The PI4 is a compact size designed power inserter and has many features (see below).

1. Minimum insertion loss, minimized signal loss.

2. Good return loss provides good impedance matching to prevent intermodulation distortion and reduce signal loss and noise levels, ensuring that the signal is clean.

3. High isolation, which can reject the signal leakage to the power port or power noise pass through to the signal end, causing cross-modulation distortion.

4. The PI4 has one screw mounting holes for quickly mounting, ealy installation.

5. Solder-back die-casting housing provides very good RFI shielding performance.

6. Compact size, suitable for small spaces.

**General Specifications**
Item	PI4-0512
Impedance	75 Ohm
Frequency Range	5 - 1218 MHz
Insertion Loss	0.5 dB(typ) / 0.8 dB(max)
Return Loss (15-1000 MHz)	20 dB(typ) / 16 dB(min)
Isolation (50-1000 MHz)	45 dB(typ) / 40 dB(min)
Current Pass (DC)	500 mA(max)
DC Block	50 VDC(max)
Dimensions	13.5(H) x 42(W) x 49(D) mm
Net Weight	20 g

* Specifications may be change depending on the model or customer's requirement.