SOONTAI - Power Inserter (2.3GHz, CE Approved, Excellent Return Loss)

Soontai - a worldwide well-known manufacturer of catv filter solutions;
- a trusted partner, provide the better choice for you.

Products

	- by Function -

	Adapters Amplifiers Attenuators Band Attenuators Cable Assemblies Calibration Kits Connectors DC Blocks Diplexers, Triplexers Equalizers Band Equalizers Filters Impedance Converters Isolators > Power Inserters Splitters, Taps Surge Protectors Switches Terminators Torque Wrenches SOONTAI TECH CO., LTD. Registered to ISO 9001 Certificate TW12/11128

3 GHz
Power Inserter

Features

* High RFI Shielding

* Support DOCSIS 3.1, up to 3 GHz

* Low Loss

* High Isolation

* Excellent Return Loss

* Flat Passband

* Robust Die-casting Housing

* Excellent Connector Thread

* Exquisite Plating Quality

* Good Weather Resistance

Introduction

Sometimes TV, CATV, MMDS or satellite reception system set-up need a power inserter.

Although the power inserter is only a small device in the system, a bad power inserter can have a large impact on signal quality, the most common being the generation of intermodulation distortion.

Are you looking for a better power inserter? Now, you got it.

The PI1-123 is a newly designed power inserter and has many features (see below).

1. Minimum insertion loss, minimized signal loss.

2. Excellent return loss provides good impedance matching to prevent intermodulation distortion and reduce signal loss and noise levels, ensuring that the signal is clean.

3. High isolation, which can reject the signal leakage to the power port or power noise pass through to the signal end, causing cross-modulation distortion.

4. The PI1 has two flexible screw mounting holes, one screw mounting hole and one ground screw hole for flexible mounting and grounding wire installation for safety.

5. Closed and thick die-casting housing provides very good RFI shielding performance.

**Items**
Model	Frequency Range
PI1-123	10 - 2300 MHz
PI1-130	10 - 3000 MHz
PI1-132	10 - 3224 MHz

**Electrical Curve**
Insertion Loss \| Return Loss SPAN 2300MHz Fig 1	This figure shows the isolation from power port to signal port. SPAN 2300MHz Fig 2

**General Specifications**
Item	PI1 - 123
Impedance	75 Ohm
Frequency Range	10 - 1000 MHz	1000 - 2300 MHz
Insertion Loss	0.5 dB(typ) / 1.0dB(max)	1.0 dB(typ) / 2.2 dB(max)
Return Loss	20 dB(typ) / 12 dB(min)	16 dB(typ) / 12 dB(min)
Isolation	60 dB(typ) / 50 dB(min)	45 dB(typ) / 30 dB(min)
Voltage Withstanding	DC 100 V(max)
Current Passing	DC 1 A(max)
Dimensions	18(H) x 54(W) x 45(D) mm
Net Weight	46.5 g

* Specifications may be change depending on the model or customer's requirement.