|
|
|
|
|
|
|
|
DVB-T In-line
Low Noise Amplifier
|
|
|
|
Features
* Compact Size
* Wide band, Up to 1GHz
* Flat Gain
* No External Power Supply Required
* Copper Housing
* Precision Connector Thread
* Exquisite Plating Quality
* Good Weather Resistance
|
 |
|
|
|
|
Introduction
This AP3A in-line type low noise amplifier series is specifically designed for use in DVB-T reception systems to boost weak signals to increase reception capability.
The AP3A amplifier is powered directly from the DVB-T set-top box by the RF connector.
We offer two different connector types(IEC, F) for DVB-T set-top boxes in different regions.
The AP3A amplifier is also suitable for ATSC, ISDB-T, ... DVB set-top boxes.
We can design other models according to your specifications.
|
|
|
|
|
|
|
Items
| Model |
Pass Band |
Connector 1 |
Connector 2 |
Image |
AP3A -10 MA-U
AP3A -10 MA |
UHF
VHF+UHF |
F, Male |
F, Female |
 |
AP3A -10 IEM/EF-U
AP3A -10 IEM/EF |
UHF
VHF+UHF |
IEC, Male |
IEC, Female |
 |
AP3A -10 IEM/FF-U
AP3A -10 IEM/FF |
UHF
VHF+UHF |
IEC, Male |
F, Female |
 |
AP3A -10 RMR-U
AP3A -10 RMR |
UHF
VHF+UHF |
F, Male |
F, Female |
 |
AP3A -10 IEMR/FF-U
AP3A -10 IEMR/FF |
UHF
VHF+UHF |
IEC, Male |
F, Female |
 |
AP3A -10 IEMR/EF-U
AP3A -10 IEMR/EF |
UHF
VHF+UHF |
IEC, Male |
IEC, Female |
 |
|
|
|
|
|
|
|
|
|
General Specifications
| Item |
AP3A -10 MA |
AP3A -10 IEMR/EF |
| Impedance |
75 ohm |
| Frequenct Range |
120 - 950MHz |
120 - 950MHz |
| Gain |
10dB (typ) |
10dB (typ) |
| Output Power (P1dB) |
0dBm (max) |
0dBm (max) |
| Return Loss |
10dB (typ) |
10dB (typ) |
| Noise Figure |
2.7dB (typ) |
2.7dB (typ) |
| Supply Voltage |
DC 5V |
DC 5V |
| Dimensions |
12.5(¢) x 41(L) mm |
11(¢) x25.4(W) x 38(L) mm |
| Net Weight |
17 g |
18 g |
* Specifications may be change depending on the model or customer's requirement.
|
|
|
|
